Arabesque Double Fitness wall mounted support
When training gets demanding, every detail matters. The Arabesque Double Fitness wall mounted supports for two wooden barres have been designed for spaces where training intensity is high and stability is essential. Their structural geometry and steel fixing base provide firmness in every exercise. Designed for barre fitness studios, functional training spaces and gyms, they allow precise and safe work during intense training sessions.
Enhanced stability for demanding training sessions
The Arabesque Double Fitness bracket incorporates a 190 × 90 mm steel fixing base and two diagonal plates that optimise the strength of the structure and load transmission.
Its structural geometry reduces vibrations and maintains excellent stability during pulling exercises or rapid weight shifts, as well as during simultaneous work on both heights. The four 50 mm fixing screws help maintain a firm response at all times.
4-in-1 system for continuous double-barre rows
Our double wall-mounted brackets are designed to connect four wooden barres inside the support, two at the upper level and two at the lower level, creating a continuous row without visual or structural interruptions. The beams are secured using discreet screws that preserve the integrity of the wood and ensure precise joining between sections. This makes it possible to configure training spaces adapted to the layout and dimensions of each studio.
The two-height configuration allows adaptation to different exercises and training levels, facilitating simultaneous use by multiple users of different ages and heights.
High-strength materials and contemporary finishes
The steel support provides the strength required for high-intensity training. The 40 mm diameter wooden barres are made from Melis pine and crafted from a single wood log sourced from sustainably managed forests. They offer a pleasant touch, secure grip and controlled flexibility that supports movement precision.
Available in white and textured matte black, the Arabesque Double Fitness bracket integrates naturally into studios that value both performance and visual identity.
More information
SKU code white colour: 30710141
SKU code black colour 30710132
Materials: Steel wall bracket in white RAL 9016 or textured black RAL 9005
Weight: 1 x 1,90 kg
Wooden beams: 2 units | Ø: 40mm | L: 100cm, 150cm, 200cm or 300cm | Yellow pine
Screws and tools:
- DIN 7505A M-5,5 x 50mm x4
- Fischer sx-8 x4
- DIN 7505A M-4,5 × 20mm x4
Screws and tools:
- DIN 7505A M-5,5 x 50mm x4
- Fischer sx-8 x4
- DIN 7505A M-4,5 × 20mm x4
1. Place the brackets on the wall in the position you wish to install them, maintaining a maximum distance of 2 metres between each one. Mark the 4 points on the wall where the brackets will be attached. Drill 4 holes at the marked points using an 8 mm drill bit.
2. Insert a Fischer dowel into each hole and secure the brackets to the wall with the 4 large DIN 7505A 5.5 x 50 mm screws. If the available space is limited, we recommend inserting the wooden bar into the brackets before attaching them to the wall.
3. With the wooden bar centered, secure it with the small DIN 7505A 4.5 x 20 mm screws through the holes at the bottom of the bracket. If you are using more than two brackets to connect two wooden bars, insert one at each end of the bracket to meet in the centre position. Then use the screws to secure them.
