Fixed Ballet Barres


Wall mounted ballet bar ARABESQUE-SINGLE

Wall mounted ballet bar Arabesque Simple

The ARABESQUE-SINGLE is a steel wall bracket suitable for wooden bars with a diameter of 40mm. Unlike many other brackets, the ARABESQUE has a cylindrical saddle wide enough for holding two wooden bars and strong enough to handle a broad range of uses from dance to fitness workouts.

One bracket, two beams

Each ARABESQUE can hold the joining together of two wooden beams. This allows your studio space to have one continuous stretch of bar without any gaps between one beam to the next. It also means you won’t need as many brackets to support your bar. The wooden beams slide into the bracket and are fastened with small hidden screws to prevent the bars from moving inside the saddle. We offer a range of different length wooden beams for the ARABESQUE.

Suitable for a variety of uses

Because of the cylindrical saddle design, the ARABESQUE-SINGLE can handle pressure from a user pushing and pulling on the bar in any direction. Standard wall brackets are designed to only resist pressure from top down weight, which make them unsuitable for barre workouts. Because many workouts involve exercises that have their users pulling on the bar away from the wall, the wooden beam in a standard bracket would tear free. With your ARABESQUE-SINGLE you can be certain this won’t occur.

Strong and long lasting

We provide you with four 50mm screws with Fischer type dowels to firmly secure the ARABESQUE to your walls. Your brackets are epoxy coated in silver for a long lasting scratch-free finish so that you can be sure that once your ARABESQUE –SINGLEs are installed, you won’t need to remove them for many years to come.


Wall mounted ballet bar ARABESQUE-SINGLE


  • Each bracket can join two wooden bars

Arabesque and bars

  • Cylindrical saddle to ensure wooden bars won’t tear free during use, unlike other standard wall brackets

Wall brackets2

  • Choice of 1, 1½, 2 and 3 metre long wooden bars. Custom lengths also available.
  • Steel brackets in epoxy coated silver for extra scratch resistance
  • Four 50mm screws with Fischer dowels included for wall mounting

Can work in conjunction with our floor supports.

Download full technical sheet

Wall mounted ballet bar ARABESQUE-SINGLE

Product code: 30590421


  • Height of support: 20.2 cm.
  • Width: 15 cm.
  • Depth: Wall—Outside of the bar 18 cm.
  • Depth: Wall—Inside of the bar 13.5 cm.
  • Mounting plate dimensions: 10 x 8 x 0.6 cm.
  • Weight: 1.15 kg.


  • 4 screws for wall mounting DIN 7505A 5,5 x 50 mm.
  • 4 Fischer type dowels.
  • 2 screws for fixing bar to support DIN 7505A 4,5 x 20 mm.

The ARABESQUE is designed for wooden bars with a diameter of 40 mm.

We recommend a maximum distance between supports of 2 m.


Wooden bars

  • Fine Southern yellow pinewood (Smoothed and unvarnished)
  • Standard lengths: 1 m, 1½ m, 2 m or 3 m.
  • Diameter: 40 mm.
  • Weight: 1 m – 1 kg, 1½ m – 1½ kg, 2 m – 2 kg, 3 m – 3 kg.

Download assembly instructions

Assembly instructions for ARABESQUE-SINGLE wall mounted ballet bar


1. Before fixing the brackets to the wall, measure and mark the location for their mountings. Ensure the mounted brackets will support a horizontal bar. Depending on the available space, some brackets should be mounted with the bar already in place. The maximum distance between brackets must not exceed 2 metres. ARABS1


2. Attach the brackets to the wall, keeping in mind that the wooden bar must fit through the hole of each cylindrical saddle.



3. Once the wooden bar is in place, tightly secure it by fastening the screws from below. ARABS3

If you would like a quotation or need more information, please fill the form or call us on

+34 933 25 1740

If you would like a quotation or need more information, please call us on

+34 933251740 or fill the form:

    What is your sector?

    I’ve read and I accept the legal terms and privacy policy.


    Pin It on Pinterest