Fixed Ballet Barres

 

Wall mounted ballet bar Arabesque Double

Wall mounted ballet bar Arabesque Double

The Arabesque Double is a steel wall bracket suitable for wooden bars with a diameter of 40mm. The Arabesque Double Black has cylindrical saddles wide enough for holding two wooden bars in each and strong enough to handle a broad range of uses from dance to fitness workouts.

One bracket, four beams

Each Arabesque Double can hold the joining together of four wooden beams. This allows your studio space to have continuous lines of barres without any gaps between one beam to the next. It also means you won’t need as many brackets to support your bars. The wooden beams slide into the bracket and are fastened with small hidden screws to prevent the bars from moving inside the saddles. We offer a range of different length wooden beams for the Arabesque.

 

Suitable for a variety of uses

Because of the cylindrical saddle design, the Arabesque Double can handle pressure from a user pushing and pulling on the bar in any direction. Because many workouts involve exercises that have their users pulling on the bar away from the wall, the Arabesque Double unique design is suitable for high intensity exercices.

 

Strong and long lasting

We provide you with four 50mm screws with Fischer type dowels to firmly secure the Arabesque Doubles to your walls. Your brackets are epoxy coated in silver for a long lasting scratch-free finish so that you can be sure that once your Arabesque Doubles are installed, you won’t need to remove them for many years to come.

 

Wall mounted ballet bar ARABESQUE-DOUBLE

 

  • Each bracket can join four wooden bars

Arabesque double and bars

  • Cylindrical saddle to ensure wooden bars won’t tear free during use, unlike other standard wall brackets

Wall brackets v2

  • Choice of 1, 1½, 2 and 3 metre long wooden bars. Custom lengths also available.
  • Steel brackets in epoxy coated silver for extra scratch resistance
  • Four 50mm screws with Fischer dowels included for wall mounting

Can work in conjunction with our floor supports.

Download full technical sheet

Wall mounted ballet bar ARABESQUE-DOUBLE

Product code: 30590321

ARABESQUE-DOUBLE tech sheet

  • Height of support: 27.2 cm.
  • Width: 15 cm.
  • Depth: Wall—Outside of the bar: 18 cm.
  • Depth: Wall—Inside of the bar: 13.5 cm.
  • Distance between bars: 19 cm.
  • Mounting plate dimensions: 10 x 8 x 0.6 cm.
  • Weight: 1.69 kg.

Includes:

  • 4 screws for wall mounting DIN 7505A 5.5 x 50 mm.
  • 4 Fischer type dowels.
  • 2 screws for fixing bar to support DIN 7505A 4.5 x 20 mm.

The ARABESQUE is designed for wooden bars with a diameter of 40 mm.

We recommend a maximum distance between supports of 2 m.

 

Wooden bars

  • Fine Southern yellow pinewood (Smoothed and unvarnished)
  • Standard lengths: 1 m, 1½ m, 2 m or 3 m.
  • Diameter: 40 mm.
  • Weight: 1 m – 1 kg, 1½ m – 1½ kg, 2 m – 2 kg, 3 m – 3 kg.
Download assembly instructions

Assembly instructions for ARABESQUE-DOUBLE wall mounted ballet bar

 

1. Before fixing the brackets to the wall, measure and mark the location for their mountings. Ensure the mounted brackets will support horizontal bars. Depending on the available space, some brackets should be mounted with the bars already in place. The maximum distance between brackets must not exceed 2 metres. ARABSa

 

2. Attach the brackets to the wall, keeping in mind that the wooden bars must fit through the hole of each cylindrical saddle.

ARABSb

 

3. Once the wooden bars are in place, tightly secure them by fastening the screws from below. ARABSc

special conditions for businesses

If you would like more information about this product, please call us on

+34 933251740

If you would like a quotation or need more information about this product, please call us on

+34 933251740

or write to us

What is your sector?

I’ve read and I accept the legal terms and privacy policy.

captcha

Pin It on Pinterest