Floor mounted ballet barres

Height adjustable floor mounted ballet bar Isa-fix

Height adjustable floor mounted ballet bar

The ISA-FIX is a height adjustable, single column support that can sit as low as 79.5cm or as high as 118cm. Unlike other ballet barres, the ISA-FIX does not rely on having any additional securing arms that require fastening to a wall to give it stability. Its robust build and solid anchorage make it suitable for a broad range of uses from dance to fitness workouts.

Continuous barre

The cradle of the Isa-fix is wide enough to join two wooden bars at the support. This feature offers two distinct advantages over most other floor mounted ballet bars. Firstly, it allows you to install a continuous barre within your space, without any gaps between one wooden beam to the next. Secondly, it reduces the number of supports you need to hold up your bars. We offer a range of different length wooden beams for the Isa-fix.

 

Flexible use

Many other ballet barres don’t drop as low or rise as high as the Isa-fix. The adjustable range of the barre spans thirty-nine centimetres, allowing your space to be inclusive of your shortest to tallest users. There are fourteen selectable positions with an easy-grip bolt used to screw-lock your height selection and firmly ensure your barre won’t slip down during use. The fourteen numbered positions also make it convenient for you to re-select a previous height you felt comfortable with.

The Isa-fix closed cradle means it can resist users pulling and pushing on the bar from any angle. Many basic floor mounted bars have an open cradle design which can only tolerate pressure from the top down. On these types of uprights, any exercises that involve pulling, risks ripping out the wooden beam. With the closed cradle design, this is impossible. In addition, the support is secured to the ground with four solid screw anchors so that you can be certain the Isa-fix won’t work loose from its fixture.

 

Designed to last

Dinamica Ballet prides itself on creating premium quality, durable equipment. We’ve designed the Isa-fix to have the wooden bars clamp into the support and not attached by screws, avoiding the need to drill holes into the wood which could lead to cracking over time. Combined with the silver epoxy coating of the steel support, your ISA-FIX will stand up to the rigours of daily use.

 

Height adjustable floor mounted ballet bar Isa-fix

Product code: 30590721
  • 14 adjustable heights
  • Each upright can join two wooden bars
  • Wooden bars clamped into uprights to avoid wood cracking
  • Closed cradle to ensure wooden bars won’t tear free during use, unlike other standard ballet barres
  • Choice of 1, 1½, 2 and 3 metre long wooden bars. Custom lengths also available.
  • Steel uprights in epoxy coated silver for extra scratch resistance
  • Four 70mm hexagon screw anchors included for floor mounting

Isa-Fix tech sheet

  • Minimum height: 79.5 cm.
  • Maximum height: 118 cm.
  • Diameter of upright: 50 mm.
  • Base dimensions: 18 x 10 x 0.6 cm.
  • Weight: 5.5 kg.
  • Adjustable to 14 different positions
  • Includes:4 Hexagon screw anchors of M 10 x 100
  • Designed for wooden bars with a diameter of 40 mm.
  • We recommend a maximum distance between supports of 2 m.

 

Wooden bars

  • Fine Southern yellow pinewood (Smoothed and unvarnished)
  • Standard lengths: 1 m, 1½ m, 2 m or 3 m.
  • Diameter: 40 mm.
  • Weight: 1 m – 1 kg, 1½ m – 1½ kg, 2 m – 2 kg, 3 m – 3 kg

 

Download full technical sheet

Assembly Instructions | Fix floor supports

Download instructions

 

1. The support is fixed to the ground with the 4 hexagon screw anchors included. You will need a professional drill and a 12 mm drill bit. We recommend the help of a professional for installation. Inside the box you will also find small screws to secure the wooden bar inside the cradle.

2. Place the supports in the position of the room you wish to install them, ensuring that the maximum distance between each one does not surpass 2 metres. Mark the 4 points per support on the ground for the holes of the screw anchors. Drill 4 holes approximately 12 cm deep at the points you have marked on the ground. Insert the hexagon screws through the base and tighten them firmly.

3. Loosen the 4 small screws of the cradle with the Allen key provided and insert the wooden bar. Place it in the desired position and adjust all the screws making sure that the wooden bar is firmly held inside the cradle. To join two wooden bars on a single support, insert a bar at each end of the cradle so that they meet in the centre.

 

Download instructions

special conditions for businesses

If you would like more information about this product, please call us on

+34 933251740

If you would like more information about this product, please call us on

+34 933251740

or write to us

    What is your sector?

    I’ve read and I accept the legal terms and privacy policy.

    captcha

    Pin It on Pinterest